MSD 7535 boost control digital 7, Legal Part number works great I have the cable and 7551 launch control If you want it $300. Eliot, ME 03903 (207) 475-4965
Two sets of .904 bushed rebuildable lifters. One set is standard other is offset. Bearings feel nice with no hard spots,wheels in great shape and roll fine. Probably 200 runs on both since last rebuild. $250 a set. Eliot, ME 03903 (207) 475-4965
CP 4.605 pistons coated by calico, 1.175 compression height, .990 pins, rings and locks pictured go with them $250. Eliot, ME 03903 (207) 475-4965
355ci, Brodix 10x Heads, pac springs, Jesel shaft rocker system with Jesel timing belt system, custom fabricated sheet metal intake manifold, Holley 750cfm carb, Moroso pan and oil pump, Ross pistons, comp cams cam, exhaust head extensions, went 7.83 @ 166mph in a super comp dragster at 1600lbs. rochester, NH 03867 (603) 953-4640
Garmin 942 - SOLD Used for 1 season but in like-new condition. Comes with sun cover, install manual, side mount bracket, flush mount pieces, and power cord. It also comes with the custom garmin trim backing pictured in the photo which was made by my local marina out of heavy gray plastic sheet when it was installed in 2017. Does not include nmea 2000 cable, tee, or original box
Garmin 942 - $900 with free shipping (PayPal friends and family) Used for 1 season but in like-new condition. Comes with sun cover, install manual, side mount bracket, flush mount pieces, and power cord. It also comes with the custom garmin trim backing pictured in the photo which was made by my local marina out of heavy gray plastic sheet when it was installed in 2017. Does not include nmea 20...
Each of these were purchased as part of the Reactor 40 Mechanical/Hydraulic pack for $2049 this winter. They were all installed on a 43 ft sailboat, tested and then removed as the owner changed his mind and is going 100% B&G now. All prices are for PayPal friends or buyer pays fees. Will ship same day. $700 takes it all. In like new condition- GHC 20 Autopilot Control Screen and Suncover - $325...
26-Dec-2018Dover, NH+4 milesAuto Parts for Sale
Set of EMPI EPC 34s with manifolds, everything moves smoothly, shafts seem tight. . $100 shipped USPS in the US, outside US ask for shipping price. Will include a pair of sync tools.
26-Dec-2018Portsmouth, NH+14 milesAuto Parts for Sale
2003 Nissan 9.9hp 2 Stroke Outboard (short shaft) - $750 Located in New Hampshire Includes fuel tank and hoses. Starts and runs great. Low hour dinghy motor.
21-Dec-2018Portsmouth, NH+14 milesAuto Parts for Sale
looking to buy one of these - Garmin Reactor 40 CCU 010-11052-67
17-Dec-2018Northwood, NH+20 milesAuto Parts for Sale
Transmission only works in first and reverse. Has new breaks in October and struts about the same time also has new winter tires. Ad number: #395664909 Contact: Buddy City: Northwood Zip: 03261 Price: 750$
Condition: Used Interchange Part Number: 257-04654 Warranty: Yes This is an Instrument or Gauge Cluster out of a 2004 GMC Sierra K3500 with a 4 Speed Automatic transmission and a 6.0L Gas Engine. The unit works as it should and the odometer on this cluster shows 199,641 miles. Our Stock # 161160 GG This will also fit the following applications... AVALANCHE 2500 03-04 (cluster), US AVALANCHE 250...
Condition: Used Interchange Part Number: 235 Warranty: Yes This is a Factory Black Leather and Wood Grain Steering Wheel that was removed from a 2007 GMC Yukon Denali that is Heated , Cruise and Radio Controls. It is in "Excellent" condition with slight wear. It will fit 07- 12 Escalade / Denali with Heat Control. Our stock # 161150 GG FREE Shipping will be to the lower 48 States only! Items no...
Condition: Used Interchange Part Number: 257-04678 Warranty: Yes This is an Instrument or Gauge Cluster out of a 2005 GMC Sierra K2500 with a 5 Speed Standard or Manual Transmission. The unit works as it should and the Odometer shows 75,738 miles. Our Stock # 161083 GG This will also fit the following applications... SIERRA 1500 PICKUP 05 (cluster), MPH (US), MT SIERRA 2500 PICKUP 05 (cluster),...
Condition: Used Interchange Part Number: 540-01370 Warranty: Yes Placement on Vehicle: Front This is a complete Hydro-Boost brake system off of a 2003 to 2007 6.0 powered Chevy or GMC 1500, 2500 or 3500 Van. This has been fully tested and is in good condition with no leaks. These units are great for conversions from Vacuum Brakes in Project Vehicles too! Our stock # 161082 GG This will fit the ...
Condition: Used Interchange Part Number: 257-04653 Warranty: Yes This is an Instrument or Gauge Cluster out of a 2003 Chevy Avalanche with a 4 speed Automatic transmission and NO Trans Temp Gauge. The unit works as it should and the odometer on this cluster shows 234,769 miles. Our Stock # 161039 GG Click here to see this cluster working in the donor vehicle >>> https://www.youtube.com/watch?v=...
SET OF four CHROME ITALIA AFTERMARKET WHEELS FROM A xxxx DODGE MAGNUM.17-INCH DIA, 7-1/2 inS WIDE, 5-LUG 115mm DIA BOLT PATTERN, WILL FIT MANY DIFFERENT VEHICLES, AMERICAN AND FOREIGN, THEY WERE JUST UNDER $800 NEW, WITH LUG NUTS AND CENTER CAPS, LIKE NEW CONDITION, $350 OR BEST OFFER (603) 332-xxxx Rochester, NHListing originally posted at http
11-Jul-2018Barrington, NH+12 milesAuto Parts for Sale
I have a 3.3 liter Chrysler engine with 60K miles. Asking $300.
Returns Accepted: Returns Accepted Item must be returned within: 30 Days Refund will be given as: Money back or exchange (buyer's choice) Return policy details: Just Chevy Trucks.com Parts Guarantee Unless otherwise stated in the part listing, all parts come with a 30 day replacement limited warranty. Buyer is responsible for shipping any returns, defective items, or warranty items at their cos...
Body Type: Pickup, Engine: 6cy, Transmission: Auto, Wheel Size: 235 75 r15', Fuel: Gasoline, Drive System: 4WD